Windshield Washer Spray Nozzle: Service and Repair

WM 926619 Removing and installing spray nozzle

Removing spray nozzle

NOTICE

Voltage peaks

- Risk of damage to load or to the control unit

-> Switch off ignition and remove remote control before disconnecting or removing load.





Installation position of spray nozzle

1. Lever off spray nozzle -1- using a plastic wedge.





Levering off spray nozzle

2. Release electric plug connection for spray nozzle -a- and pull it off.





Disconnecting plug connection

3. Release washer-fluid hose -A- and pull it off -B-.





Disconnecting hose

Installing spray nozzle

Information

The installation position ("L" for left and "R" for right) is marked on the inside of the spray nozzles. The spray nozzles must be installed in the vehicle according to this marking.

1. Slide in locking mechanism on washer-fluid hose -arrow-.





Sliding in locking mechanism

2. Attach washer-fluid hose to the spray nozzle until it engages securely -arrow-.





Clipping in hose

3. Plug in electric plug connection -1- for spray nozzle in direction of arrow until it engages securely.





Connecting electric plug connection

4. Fit spray nozzle -1- at the top -A- and clip it in at the bottom -B-.





Clipping in spray nozzle

5. Check spray nozzle setting and spray pattern.