Operation CHARM: Car repair manuals for everyone.

914419 Removing and installing loudspeaker amplifier


WM 914419 Removing and installing loudspeaker amplifier

Tools





Technical values





Preliminary work

1. If the loudspeaker amplifier has to be replaced, the values must be read out prior to removal using the 2nd generation PIWIS Tester 9818. -> 914455 Replacing loudspeaker amplifier 914455 Replacing loudspeaker amplifier.
2. Remove rear right luggage compartment side-panel lining. -> 700319 Removing and installing side-panel lining for rear luggage compartment - section on "Removing" Service and Repair

Removing loudspeaker amplifier

Information

The number of plug connections can vary, depending on equipment.





Installation position of loudspeaker amplifier

NOTICE

Voltage peaks

- Risk of damage to load or to the control unit

-> Switch off ignition and remove remote control before disconnecting or removing load.

Information

Always comply with the regulations for handling ESD-sensitive components!

- Assembly work must only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche.

- The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed.

- Never touch the electric pins and plug contacts.

1. Unscrew three fastening screws -1-.





Removing loudspeaker amplifier

2. Release electric plug connection using a screwdriver -a- and pull it off -B-.





Releasing and pulling off plug connection

3. Release electric plug connection -a- and pull it off -B-.





Releasing and pulling off plug connection

Installing

Installing loudspeaker amplifier

1. Plug in electric plug connection -B- and lock it -a-.





Plugging in and locking plug connection

2. Plug in electric plug connection -arrow- until it engages securely.





Plugging in and locking plug connection

3. Screw in three fastening screws -1-. => Tightening torque: 8 Nm (6 ftlb.)





Removing loudspeaker amplifier

Subsequent work

1. If the loudspeaker amplifier was replaced, the values must be written using the 2nd generation PIWIS Tester 9818. -> 914455 Replacing loudspeaker amplifier 914455 Replacing loudspeaker amplifier.
2. Install rear right luggage compartment side-panel lining. -> 700319 Removing and installing side-panel lining for rear luggage compartment - section on "Installing" Service and Repair