Crankshaft: Service and Repair

WM 134819 Removing and installing crankshaft

Preliminary work

1. Remove the engine. -> 100119 Removing and installing engine 100119 Removing and installing engine
2. Remove transmission from engine.
3. Secure engine on assembly support. -> 1001IN Supporting the engine on the body
4. Drain engine oil. For details, see -> 170117 Draining and filling engine oil (changing engine oil) Removal and Replacement
5. Disassemble the engine. Cylinder heads are removed, but must remain intact. The starter, knock sensors, thermostat housing and coolant guide remain fitted on the crankcase. For details, see -> 1001Z1 Disassembling engine 1001Z1 Disassembling engine

Information

Component overview





Crankshaft





Subsequent work

1. Assemble the engine. -> 1001Z2 Assembling engine 1001Z2 Assembling engine