692519 Removing and installing rear seat-belt buckle

WM 692519 Removing and installing rear seat-belt buckle

Technical values





Preliminary work

Preliminary work for removing and installing rear left seat-belt buckle

1. Remove padding for 2/3-split folding seat. -> 744919 Removing and installing padding for 2/3-split folding rear seat - section on "Removing" 744919 Removing and installing padding for 2/3-split folding rear seat

Preliminary work for removing and installing rear seat-belt buckle at the centre

1. Remove 2/3-split folding seat. -> 724819 Removing and installing 2/3-split folding rear seat - section on "Removing" 724819 Removing and installing 2/3-split folding rear seat

Preliminary work for removing and installing rear right seat-belt buckle

1. Remove padding for 1/3-split folding seat. -> 744919 Removing and installing padding for 1/3-split folding rear seat - section on "Removing" 744919 Removing and installing padding for 1/3-split folding rear seat

Removing rear seat-belt buckle

Removing rear left seat-belt buckle





Overview of seat-belt buckles





1. Unscrew fastening screw -1- on seat-belt buckle -2- at the rear left.





Rear left seat-belt buckle

2. Remove seat-belt buckle.

Removing rear seat-belt buckle at the centre





Overview of seat-belt buckles





1. Unscrew fastening screw -1- on seat trim -2- at the right.





Right trim on 2/3-split folding seat

2. Carefully unclip the trim panel -2- at the brackets -3- and lift it up and off.
3. Unscrew fastening screw -1- on rear seat-belt buckle -2- at the centre.





Rear seat-belt buckle at the centre

4. Remove seat-belt buckle.

Removing rear right seat-belt buckle





Overview of seat-belt buckles





1. Unscrew fastening screw -1- on seat-belt buckle -2- at the rear right.





Rear right seat-belt buckle

2. Remove seat-belt buckle.

Installing rear seat-belt buckle

Installing rear left seat-belt buckle

1. Place rear left seat-belt buckle -2- in installation position.





Rear left seat-belt buckle

2. Fit the fastening screw -1- for the rear left seat-belt buckle -2- and tighten to => Tightening torque: 50 Nm (37 ftlb.).

Installing rear seat-belt buckle at the centre

1. Place rear seat-belt buckle -2- at the centre in installation position.





Rear seat-belt buckle at the centre

2. Fit the fastening screw -1- for the rear seat-belt buckle -2- at the centre and tighten to => Tightening torque: 50 Nm (37 ftlb.).
3. Clip in right trim -2- at the sides of the 2/3-split folding rear seat at mounting points -3- on the seat frame.





Right trim on 2/3-split folding seat

4. Screw in fastening screw -1- on the trim -2- at the rear right of the 2/3-split folding seat and tighten to => Tightening torque: 3.5 Nm (2.5 ftlb.).

Installing rear right seat-belt buckle

1. Place rear right seat-belt buckle -2- in installation position.





Rear right seat-belt buckle

2. Fit the fastening screw -1- for the rear right seat-belt buckle -2- and tighten to => Tightening torque: 50 Nm (37 ftlb.).

Subsequent work

Subsequent work for removing and installing rear left seat-belt buckle

1. Install padding for 2/3-split folding rear seat. -> 744919 Removing and installing padding for 2/3-split folding rear seat - section on "Installing" 744919 Removing and installing padding for 2/3-split folding rear seat

Subsequent work for removing and installing rear seat-belt buckle at the centre

1. Install 2/3-split folding rear seat. -> 724819 Removing and installing 2/3-split folding rear seat - section on "Installing" 724819 Removing and installing 2/3-split folding rear seat

Subsequent work for removing and installing rear right seat-belt buckle

1. Install padding for 1/3-split folding rear seat. -> 744919 Removing and installing padding for 1/3-split folding rear seat - section on "Installing" 744919 Removing and installing padding for 1/3-split folding rear seat