Fluid Pan: Service and Repair

WM 375519 Removing and installing ATF pan

Technical values





Preliminary work

1. Remove engine guard. -> 108019 Removing and installing engine guard 108019 Removing and installing engine guard

Removal

Removing ATF pan

1. Unscrew oil drain plug -A-.
2. Unscrew overflow pipe -C-.
3. Drain ATF.





Overflow pipe on ATF pan

4. Unscrew screws on the ATF pan in diagonally opposite sequence and remove ATF pan -2-.





Mounting point for ATF pan

Installation

Installing ATF pan

1. Clean all magnets in the ATF pan. Make sure to stick the magnets back on fully.
2. Fit ATF pan with new gasket -1-. When doing this, check that all spacer sleeves -2- are inserted fully in the new gasket.





ATF-pan gasket

3. Tighten screws on the ATF pan in several stages and in diagonally opposite sequence.





4. Install overflow pipe -C-.





5. Screw in oil drain plug -A- with a new sealing ring -B-.





Overflow pipe on ATF pan





Subsequent work

1. Fill in ATF. -> 370255 Changing ATF 370255 Changing ATF
2. Install engine guard. -> 108019 Removing and installing engine guard 108019 Removing and installing engine guard