399035 Checking and topping up oil for all-wheel final drive

WM 399035 Checking and topping up oil for all-wheel final drive

Tools





Technical values





Preliminary work for oil for all-wheel final drive

1. Remove engine guard. -> 108019 Removing and installing engine guard - section on "Removing" 108019 Removing and installing engine guard

Checking oil for all-wheel final drive

WARNING

Hot fluid

- Danger of scalding

-> Let the fluid cool down.
-> Wear personal protective gear.

Information

- Vehicle must be horizontal to check oil level in all-wheel final drive.

1. Unscrew oil inspection plug -A- using tool special inserts model AB 170.





Oil inspection plug/filler screw

2. The oil level is correct if the oil reaches the lower edge of the inspection window.
3. If this is not the case, top up the oil. -> 399035 Checking and topping up oil for all-wheel final drive - section on "Topping up"
4. Screw in oil inspection plug -A- with a new sealing ring. To do this, use the special tool special inserts model AB 170 and accessory for torque wrench: open ring wrench insert a/f 13 with adapter 98-1. => Tightening torque: 35 Nm (26 ftlb.)





Tightening to the specified torque

Topping up oil for all-wheel final drive

WARNING

Hot fluid

- Danger of scalding

-> Let the fluid cool down.
-> Wear personal protective gear.

Information

- Vehicle must be horizontal in order to fill final drive.

1. Unscrew oil inspection plug -A- using tool special inserts model AB 170.





Oil inspection plug/filler screw

Information

- Use only oil approved by Porsche.

2. Fill in oil using manual metering pump WE 1372 up to the lower edge of the oil inspection plug -A-.
3. Screw in oil inspection plug -A- with a new sealing ring. To do this, use the special tool special inserts model AB 170 and accessory for torque wrench: open ring wrench insert a/f 13 with adapter 98-1. => Tightening torque: 35 Nm (26 ftlb.)





Tightening to the specified torque

Subsequent work for oil for all-wheel final drive

1. Install engine guard. -> 108019 Removing and installing engine guard - section on "Installing" 108019 Removing and installing engine guard