855319 Removing and installing centre air vent

WM 855319 Removing and installing centre air vent

Tools





Removing centre air vent





Installation position of centre air vent

1. Position unlocking tools unlocking tool 9827.
1.1. Insert the first unlocking tool over the third disc from below, fit it at the outside and guide the hook through the opening and onto the metal clips.
1.2. Insert the second unlocking tool under the first disc from above, fit it at the inside and guide the hook through the opening and onto the metal clips.
2. Release air vent.





Releasing air vent

2.1. Release the air vent by turning both tools to the left and pull it towards the rear.
3. Disconnect plug connection.





Disconnecting plug connection

4. Perform a function test on the air vent.
4.1. Move the vanes in all directions at the handle.
4.2. Check that all the vanes move as required.
4.3. Replace the air vent if necessary.

Installing centre air vent

1. Connect plug connection.





Connecting plug connection

2. Check that the plug connection is seated securely.
3. Fit the air vent and press it in until it engages securely.





Pressing in air vent

4. Perform a function test on the air vent.
4.1. Move the vanes in all directions at the handle.
4.2. Check that all the vanes move as required.
4.3. Replace the air vent if necessary.