407819 Removing and installing front connecting link (suspension/stabiliser)

WM 407819 Removing and installing front connecting link (suspension/stabiliser)

Tools





Removing front connecting link (suspension/stabiliser)





Overview

1. Raise the vehicle -> 4X00IN Lifting the vehicle Service and Repair.
2. Remove fastening nuts -1-.





Removing connecting link

2.1. Counter ball pin with screwdriver 9546.
3. Remove connecting link -2-.

Installing front connecting link (suspension/stabiliser)

1. Installation is performed in reverse order to removal.
2. Observe the correct tightening torques when installing-> 4X00IN00 Tightening torques for front axle.