519219 Removing and installing Cover For Front Underbody

Removing And Installing Cover For Front Underbody

Technical values







Preliminary work
Lift the vehicle.

Removing cover for front underbody







INFORMATION: Fastening nuts cannot be used again following removal.







1. Unscrew fastening screws -2- and fastening nuts -3- .
2. Pull cover for front underbody -1- out of the overlap.

Installing cover for front underbody







INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.







1. Insert cover for front underbody -1- .
2. Tighten fastening screws -2- . Tightening torque - Final tightening: 1.5 ftlb.
3. Tighten fastening nuts -3- . Tightening torque - Final tightening: 0.5 ftlb.

Subsequent work
Lower the vehicle.