DTC 65
DTC 65 BELT PRETENSIONER RH FAILUREDTC DETECTING CONDITION:
^ Seat belt pretensioner (RH) circuit is shorted to power supply.
^ Pretensioner is faulty.
^ Pretensioner harness is faulty.
^ Airbag control module is faulty.
CAUTION:
^ Before diagnosing the airbag system, be sure to turn the ignition switch OFF, disconnect the ground cable from battery, and wait more than 20 seconds before starting to work.
^ Before replacing the airbag module, seat belt pretensioner, roll connector, control module and sensor, reconnect each part and confirm that the warning light operates properly.
^ When inspecting the side airbag harness, disconnect the side airbag module connector and seat belt pretensioner connector for the safety reasons.
Wiring Diagram:
Step 1 - 5:
