Automatic Volume Control: Service and Repair

Radio Volume Compensator Interior Noise Microphone Replacement

Removal Procedure

1. Remove the overhead console. Refer to Roof Console Replacement (Roof Console Replacement).




2. Disconnect the microphone electrical connector (3).
3. Remove the 2 retaining screws to the microphone.
4. Remove the microphone (2) from the overhead console.

Installation Procedure




1. Install the microphone (2) to the overhead console.

Notice: Refer to Fastener Notice.

2. Install the 2 microphone retaining screws.

Tighten the screws to 0.8 Nm (7 in. lbs.).

3. Connect the microphone electrical connector (3).
4. Install the overhead console. Refer to Roof Console Replacement (Roof Console Replacement).