Child Restraint Tether Anchor Replacement - Rear No. 1

Child Restraint Tether Anchor Replacement - Rear No. 1

Removal Procedure

1. Remove the seat from the vehicle.
2. Remove the trim panel from the seat cushion.




3. Remove the bolt (1) securing the child tether anchor (2) to the seat cushion frame.
4. Remove the child tether anchor.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the child tether anchor (2) to the seat cushion frame with the bolt (1) and tighten to 35 Nm (26 ft. lbs.).
2. Install the trim panel to the seat cushion.
3. Install the seat in the vehicle.