Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT SEAT SIDE AIRBAG ASSEMBLY: INSTALLATION

1. INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY

CAUTION:
* The nuts must not be reused.
* Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.
(a) Install the front seat side airbag assembly with 2 new nuts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Engage the 2 clamps to connect the wire harness.

2. INSTALL FRONT SEATBACK WITH COVER PAD Reassembly

3. INSTALL FRONT SEAT HEADREST SUPPORT ASSEMBLY Reassembly

4. INSTALL FRONT SEAT ASSEMBLY LH Installation

5. INSTALL FRONT SEAT ASSEMBLY RH Installation

6. INSTALL SEAT TRACK INNER BRACKET COVER Installation

7. INSTALL SEAT TRACK COVER Installation

8. INSTALL FRONT SEAT HEADREST ASSEMBLY

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

10. INSPECT SRS WARNING LIGHT

Diagnosis System