Removal

FA20 INTAKE / EXHAUST: INTAKE MANIFOLD: REMOVAL; 2013 MY FR-S [03/2012 -]

1. CHECK FUEL PUMP OPERATION AND INSPECT FOR FUEL LEAK Fuel System

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

3. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE Removal

4. REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY

(a) Remove the 4 bolts and the throttle with motor body assembly.

(b) Remove the gasket.

5. REMOVE INJECTOR DRIVER Removal

6. REMOVE INJECTOR COVER (for Bank 2) Removal

7. REMOVE INJECTOR COVER (for Bank 1) Removal

8. DISCONNECT NO. 1 FUEL HOSE Removal

9. DISCONNECT FUEL DELIVERY PIPE SUB-ASSEMBLY

(a) Remove the bolt and disconnect the fuel delivery pipe sub-assembly.

(b) Disconnect the No. 2 fuel vapor feed hose and move the fuel delivery pipe toward the front of the vehicle.

10. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

(a) Disengage the 3 craws and remove the No. 1 engine cover sub-assembly.

HINT
Disengage the 3 craws in the order shown in the illustration.

11. DISCONNECT VACUUM TUBE CONNECTOR HOSE (for Manual Transmission) Removal

12. DISCONNECT VENTILATION HOSE

(a) Disconnect the ventilation hose.

13. REMOVE INTAKE MANIFOLD

(a) Disconnect the manifold absolute pressure sensor connector.

(b) Disconnect the purge valve connector.

(d) Disengage the clamp and disconnect the engine wire harness.

(e) Disengage the 2 clamps and disconnect the 4 connectors.

(f) Disconnect the fuel pump connector.

(g) Remove the 6 bolts, intake manifold and 2 gaskets.