DTC 36

DIAGNOSTIC CHART

Diagnostic Chart:

Diagnosis
Air suction solenoid valve does not function.
Harness connector between ECM and air suction solenoid valve is shorted or open.

CHECK INPUT SIGNAL FOR ECM

Input Signal:

1. Turn ignition ON.
2. Measure voltage between ECM connector terminal and body.

Connector & Terminal Voltage
(E31) 3 - body 10 V min.

CHECK AIR SUCTION SOLENOID VALVE

Resistance Test:

1. Turn ignition OFF.
2. Unplug connector from solenoid valve.
3. Measure resistance between solenoid valve terminals.

Terminals Resistance
No. 1 - 2 36 ohms @ 68°F (20°C)

CHECK POWER SUPPLY TO AIR SUCTION SOLENOID VALVE

Voltage Test:

1. Turn ignition ON.
2. Measure voltage between solenoid valve connector and body.

Connector & Terminal Voltage
(E3) 1 - body 10 V min.