Operation CHARM: Car repair manuals for everyone.

DTC 36

DTC 36
AIR SUCTION SOLENOID VALVE






Diagnosis
- The Air Suction Solenoid Valve is not functioning.
- The harness connector between Engine Control Module (ECM) and Air Suction Solenoid Valve is short or open.

1. Check input signal for ECM.
a. Turn Ignition Switch to "ON".






b. Measure signal voltage between ECM and body.

Connector & Terminal / Specified Voltage:
(E31) No. 3 - Body / 10 Volts maximum


2. Check Air Suction Solenoid Valve.
a. Turn Ignition Switch to "OFF".
b. Disconnect connector from Air Suction Solenoid Valve.






c. Measure resistance between connector Terminals of Air Suction Solenoid Valve.

Terminals / Specified Resistance:
No. 1 - No. 2 / 36 Ohms at 20°C (68°F).


3. Check power supply to Air suction Solenoid Valve.
a. Turn Ignition Switch to "ON".






b. Measure voltage between Air Suction Solenoid Valve connector and body.

Connector & Terminal / Specified Voltage:
(E3) No. 1 - Body / 10 Volts maximum