Read Diagnostic Trouble Code (DTC)

Read Diagnostic Trouble Code (DTC)

OPERATION

1. ECM
1. On the {{Main Menu}} display, select {Each System Check}.
2. On the {{System Selection Menu}}, select {Engine Control System}.
3. After engine type information is displayed, select [OK].
4. On the {{Engine Diagnosis}}, select {Diagnostic Code(s) Display}.
5. On the {{Diagnostic Code(s) Display}}, {select Current DTC} or {Past DTC}.

NOTE:
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC). Immobilizer (Diagnostics)

2. BODY INTEGRATED UNIT
1. On the {{Main Menu}} display, select {Each System Check}.
2. On the {{System Selection Menu}}, select {Integ. Unit Mode}.
3. After {Integ. Unit Mode} is displayed, select [OK].
4. On the {{Integ. unit mode failure diag}}, select Diagnostic Code(s) Display}.

NOTE:
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC). Immobilizer (Diagnostics)