With Manufacturer's Scan Tool
CLEAR MEMORY MODEOPERATION
SUBARU SELECT MONITOR (NORMAL MODE)
1. On the {{Main Menu}}, select {Each System Check}.
2. On the {{System Selection Menu}}, select {Engine Control System}.
3. Select [OK] after the information of engine type has been displayed.
4. On the {{Engine Diagnosis}} display screen, select {Clearing Memory}.
5. When the "Clear Memory?" is shown on the screen, click the [Yes] button.
6. When "Done" and "Turn ignition switch to OFF" are shown on the display screen, turn the ignition switch to OFF.
NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Therefore, start the engine after 10 seconds or more have passed since turning the ignition switch to ON.
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
SUBARU SELECT MONITOR (OBD MODE)
1. On the {{Main Menu}}, select {Each System Check}.
2. On the {{System Selection Menu}}, select {Engine Control System}.
3. Select [OK] after the information of engine type has been displayed.
4. On the {{Engine Diagnosis}} display screen, select the {OBD System}.
5. On the {{OBD Menu}} display screen, select the {Clear Diagnostic Code}.
6. When the "Clear Diagnostic Code?" is shown on the screen, click the [Yes] button.
7. When "Done" and "Turn ignition switch to OFF" are shown on the display screen, turn the ignition switch to OFF.
NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Therefore, start the engine after 10 seconds or more have passed since turning the ignition switch to ON.
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".