With Manufacturer's Scan Tool

READ DIAGNOSTIC TROUBLE CODE (DTC)

OPERATION

SUBARU SELECT MONITOR (NORMAL MODE)
1. On the {{Main Menu}}, select {Each System Check}.
2. On the {{System Selection Menu}}, select {Engine Control System}.
3. Click the [OK] key after the information regarding engine type has been displayed.
4. On the {{Engine Diagnosis}} display screen, select {Diagnostic Code(s) Display}.
5. On the {{Diagnostic Trouble Code}} screen, select {Temporary Diagnostic Code(s)} or {Memorized Diagnostic Code(s)}.

NOTE:
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". Engine (Diagnostics)

SUBARU SELECT MONITOR (OBD MODE)
1. On the {{Main Menu}}, select {Each System Check}.
2. On the {{System Selection Menu}}, select {Engine Control System}.
3. Click the [OK] key after the information regarding engine type has been displayed.
4. On the {{Engine Diagnosis}} display screen, select the {OBD System}.
5. On the {{OBD Menu}} display screen, select the {Diagnostic Code(s) Display}.
6. Make sure DTC is shown on the screen.

NOTE:
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". Engine (Diagnostics)