> display, select {Each System Check}.
2) On <> display, select {Brake Control System}.
3) Click the [OK] button after {VDC} is displayed.
4) On <> display, select {Diagnostic Code(s) Display}.
5) Record the DTC and data.

NOTE:
^ For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
^ For details concerning DTCs, refer to "List of Diagnostic Trouble Code (DTC)". List of Diagnostic Trouble Code (DTC)
^ Up to 3 DTCs are displayed in the order of detection.
^ If a particular DTC is not stored in memory properly at the occurrence of problem (due to a drop in VDCCM&H/U power supply etc.), the DTC suffixed with a question mark "?" is displayed on Subaru Select Monitor display screen. This shows it may be an unreliable reading.