P0707

DTC P0707, No.34: Transmission Range Sensor (Switch) Circuit Low Input





Wiring Diagram





DTC Detecting Condition and Trouble Area

DTC Confirmation Procedure

WARNING:
^ When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
^ Road test should be carried out with 2 persons, a driver and a tester, on a level road.

1. Turn ignition switch OFF.
2. Clear DTC stored in TCM and ECM.
3. Start engine and drive vehicle at 40 mph, 60 km/h or more for longer than 30 seconds at both "D" and "2" range.
4. Stop vehicle and check DTC and pending DTC.








DTC Troubleshooting





Table for Step 4