Clearing Trouble Codes
CLEARING DIAGNOSTIC TROUBLE CODESNOTE: This is the only information provided by the manufacturer for clearing diagnostic trouble codes for this system.
In case of not using hand-held tester:
Clear the DTC of skid control ECU.
1. Using SST, connect terminals Tc and E1 of DLC1 or Tc and CG of DLC3.
SST 09843 - 18020 or 09843 - 18040
2. Turn the ignition switch ON.
3. Clear the DTC stored in ECU by depressing the brake pedal 8 or more times within 5 seconds.
4. Check that the warning light shows the normal code.
5. Remove the SST from the terminals of DLC1 or DLC3.
SST 09843 - 18020 or 09843 - 18040
HINT: Cancellation cannot be done by removing the battery cable or ECU-IG fuse.
In case of using hand-held tester:
Clear the DTC.
1. Hook up the hand-held tester to the DLC3.
2. Turn the ignition switch ON.
3. Operate the hand-held tester to erase the codes.
HINT: Please refer to the hand-held tester operator's manual for further details.