Washer Motor (for Rear Side)

WIPER / WASHER: WASHER MOTOR (for Rear Side): INSPECTION

INSPECTION

1. INSPECT REAR WASHER MOTOR AND PUMP ASSEMBLY
(a) Remove the washer jar.
(b) Disconnect the rear washer motor and pump connector.
HINT: The check should be performed with the rear washer motor and pump installed on the washer jar.

(c) Fill the washer jar with washer fluid.





(d) Connect a battery positive (+) lead to terminal 1 of the rear washer motor and pump, and a negative (-) lead to terminal 2.
(e) Check that washer fluid flows from the washer jar.
OK:
Washer fluid flows from the washer jar.
If the result is not as specified, replace the washer motor and pump assembly.