Installation

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER: INSTALLATION

INSTALLATION

1. INSTALL NO. 2 RADIO RECEIVER BRACKET





(a) Install the No. 2 radio receiver bracket with the 4 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44in-lbf)
2. INSTALL NO. 1 RADIO RECEIVER BRACKET





(a) Install the No. 1 radio receiver bracket with the 4 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44in-lbf)
3. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY





(a) Install the instrument cluster center finish panel sub-assembly with the 4 screws.
4. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET





(a) Engage the 2 clips.
(b) Install the navigation receiver assembly with bracket with the 4 bolts.
Torque: 11 Nm (112 kgf-cm, 8ft-lbf)
5. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL Installation
6. INSTALL CONSOLE BOX SUB-ASSEMBLY Installation
7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation
8. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation
9. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
10. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation
11. INSTALL FRONT DOOR SCUFF PLATE RH Installation
12. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation
13. INSTALL CONSOLE BOX ASSEMBLY Installation
14. INSTALL NO. 2 CONSOLE BOX CARPET Installation
15. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System) Installation
16. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System) Installation