Removal

THEFT DETERRENT / KEYLESS ENTRY: ENTRY LOCK AND UNLOCK SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG Disassembly
3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Disassembly
4. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Removal
5. REMOVE COURTESY LIGHT ASSEMBLY Removal
6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Disassembly
7. REMOVE FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY Disassembly
8. REMOVE DOOR SIDE AIRBAG SENSOR Removal
9. REMOVE FRONT DOOR SERVICE HOLE COVER Disassembly
10. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY Disassembly
11. REMOVE FRONT DOOR OUTSIDE HANDLE COVER WITH LOCK CYLINDER ASSEMBLY (for Driver Side) Disassembly
12. REMOVE FRONT DOOR OUTSIDE HANDLE COVER (for Front Passenger Side) Disassembly
13. REMOVE FRONT DOOR OUTSIDE HANDLE ASSEMBLY





(a) Disengage the 2 claws.
(b) Disconnect the connector.





(c) Move the lever in the direction indicated by the arrow in the illustration.





(d) Remove the front door outside handle assembly as shown in the illustration.