Pinout Values and Diagnostic Parameters

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: TERMINALS OF ECU

TERMINALS OF ECU

1. CHECK MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK ASSEMBLY)
(a) Disconnect the 2C, 2F and 2K main body ECU (driver side junction block assembly) connectors.





(b) Measure the voltage and resistance according to the value(s) in the table below.
HINT: Measure the values on the wire harness side with the connector disconnected.





If the result is not as specified, there may be a malfunction in the wire harness.
(c) Reconnect the 2C, 2F and 2K main body ECU (driver side junction block assembly) connectors.
(d) Measure the voltage according to the value(s) in the table below.









If the result is not as specified, the main body ECU (driver side junction block assembly) may have a malfunction.