Removal

HEATING / AIR CONDITIONING: CONDENSER: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM Service and Repair
3. REMOVE COOL AIR INTAKE DUCT SEAL Removal
4. REMOVE RADIATOR GRILLE PROTECTOR Removal
5. REMOVE RADIATOR GRILLE Removal
6. REMOVE INLET NO. 2 AIR CLEANER Removal
7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
8. REMOVE AIR CLEANER CASE Removal
9. REMOVE BATTERY Removal
10. REMOVE INLET NO. 1 AIR CLEANER Removal
11. REMOVE LOW PITCHED HORN ASSEMBLY Removal
12. REMOVE HIGH PITCHED HORN ASSEMBLY Removal
13. REMOVE HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch) Removal
14. REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch) Removal
15. REMOVE HOOD LOCK SUPPORT SUB-ASSEMBLY





(a) Disengage each clamp.





(b) Remove the 2 bolts and hood lock support support sub-assembly.
16. REMOVE UPPER RADIATOR SUPPORT Removal
17. DISCONNECT COOLER REFRIGERANT DISCHARGE HOSE





(a) Remove the bolt and disconnect the cooler refrigerant discharge hose from the condenser.
(b) Remove the O-ring from the cooler refrigerant discharge hose.
NOTICE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

18. DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY





(a) Remove the bolt and disconnect the air conditioning tube and accessory assembly.
(b) Remove the O-ring from the air conditioning tube and accessory assembly.
NOTICE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

19. REMOVE COOLER CONDENSER ASSEMBLY





(a) Remove the 4 bolts and cooler condenser assembly as shown in the illustration.