Actuator Check

HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System): ACTUATOR CHECK

ACTUATOR CHECK

1. ACTUATOR CHECK
(a) Start the engine and warm it up.
(b) Perform the indicator check Diagnosis System.





(c) Press the "Recirculation/Fresh" switch to perform the actuator check.
HINT: Be sure to perform the actuator check after starting the engine.

Text in Illustration









(d) As the actuator check is repeated from steps 1 to 10 at 1 second intervals, check the temperature and air flow visually and by hand.

HINT:
- The display blinks at 1 second intervals in the step operation.
- Press the "OFF" switch to finish panel diagnosis.
- Press the "AUTO" switch to enter sensor check mode.

Text in Illustration













(e) If the steps are difficult to read because they change automatically, press the "MODE" switch to display the steps one at a time so that they can be read easily. The items are displayed step by step each time the "MODE" switch is pressed.

HINT:
- Press the "OFF" switch to finish panel diagnosis.
- Press the "Recirculation/Fresh" switch to enter sensor check mode.

Text in Illustration