Key Reminder Warning System

DOOR LOCK: KEY REMINDER WARNING SYSTEM: TERMINALS OF ECU

TERMINALS OF ECU

1. CHECK MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK ASSEMBLY)
(a) Disconnect the 2F and 2C driver side junction block connectors.





(b) Disconnect the D50 and D51 main body ECU connectors.
(c) Measure the resistance and voltage according to the value(s) in the table below.
HINT: Measure the values on the wire harness side with the connector disconnected.





If the result is not as specified, there may be a malfunction on the wire harness side.