Turn Signal Flasher: Testing and Inspection

LIGHTING (EXT): TURN SIGNAL FLASHER ASSEMBLY: INSPECTION

INSPECTION

1. INSPECT TURN SIGNAL FLASHER ASSEMBLY





(a) Disconnect the D34 turn signal flasher assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:





Text in Illustration





If the result is not as specified, repair or replace the wire harness or connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:





If the result is not as specified, repair or replace the wire harness or connector.





(d) Reconnect the D34 turn signal flasher assembly connector.
(e) Measure the voltage according to the valve(s) in the table below.
Standard Voltage:





Text in Illustration





If the result is not as specified, replace the turn signal flasher assembly.