Clockspring Assembly / Spiral Cable: Testing and Inspection

SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: INSPECTION

INSPECTION

1. INSPECT SPIRAL CABLE
(a) Visually check for defects with the spiral cable removed from the vehicle.
(1) The defects are as follows:

- Scratches on the spiral cable
- Small cracks the spiral cable
- Dents on the spiral cable
- Chips on the spiral cable
- Cracks or other damage to the connector
OK:
No defects are found.
HINT: If any of the defects is found, replace the spiral cable with a new one.





(b) Inspect the spiral cable.

Text in Illustration





(1) Measure the resistance according to the value(s) in the table below.
NOTICE: To avoid breakage of the spiral cable, do not turn the spiral cable more than necessary.

If the value is not within the specified range, replace the spiral cable.

Standard Resistance