Removal

DOOR / HATCH: POWER BACK DOOR DRIVE UNIT: REMOVAL

1. REMOVE REAR DOOR SCUFF PLATE LH Removal

2. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH Removal

3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal

4. REMOVE DECK BOARD ASSEMBLY Removal

5. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY Removal

6. REMOVE DECK SIDE TRIM BOX LH Removal

7. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY Removal

8. REMOVE DECK SIDE TRIM BOX RH Removal

9. REMOVE NO. 1 DECK BOARD Removal

10. REMOVE REAR SEAT SUB FLOOR PANEL ASSEMBLY Removal

11. REMOVE REAR FLOOR FINISH PLATE Removal

12. REMOVE REAR SEAT HEADREST ASSEMBLY LH Removal

13. REMOVE REAR SEAT INNER TRACK BRACKET COVER LH Removal

14. REMOVE REAR SEAT OUTER TRACK BRACKET COVER LH Removal

15. DISCONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY Removal

16. REMOVE REAR SEAT ASSEMBLY LH Removal

17. REMOVE RECLINING REMOTE CONTROL BEZEL LH Removal

18. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY LH Removal

19. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY LH Removal

20. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH Removal

21. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH Removal

22. REMOVE POWER BACK DOOR ROD

(a) Using a screwdriver, remove the stop ring along the groove.

HINT
Tape the screwdriver tip before use.





Text in Illustration





(b) Release the ball joint and disengage the power back door rod.

(c) Using a screwdriver, remove the stop ring along the groove.

HINT
Tape the screwdriver tip before use.





Text in Illustration





(d) Release the ball joint and remove the power back door rod.

23. REMOVE POWER BACK DOOR UNIT ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 4 bolts and power back door unit assembly.