Instrument Cluster / Carrier: Testing and Inspection

METER / GAUGE / DISPLAY: DRIVE MONITOR SWITCH: INSPECTION

1. INSPECT DRIVE MONITOR SWITCH





(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





*1: w/o Rear View Monitor System

*2: w/ Rear View Monitor System

(b) Apply battery voltage from the wire harness back side between the terminals of the switch, and check the lighting condition of the drive monitor switch.

OK:





Text in Illustration





HINT
If the result is not as specified, replace the drive monitor switch Removal.