Component Tests and General Diagnostics

TIRE AND WHEEL: TIRE AND WHEEL SYSTEM: INSPECTION

1. INSPECT TIRE

(a) Check the tires for wear and proper inflation pressure.

Cold tire inflation pressure





(b) Using a dial indicator, check the tire runout.





Tire runout:

1.4 mm (0.055 in.) or less

2. ROTATE TIRES

(a) Rotate the tires as shown in the illustration.





3. INSPECT WHEEL BALANCE

(a) Check and adjust the off-the-car balance.





(b) If necessary, check and adjust the on-the-car balance.

Imbalance after adjustment:

8.0 g (0.018 lb) or less

4. INSPECT FRONT AXLE HUB BEARING LOOSENESS

Front Axle Hub

5. INSPECT REAR AXLE HUB BEARING LOOSENESS

Rear Axle Hub

6. INSPECT FRONT AXLE HUB RUNOUT

Front Axle Hub

7. INSPECT REAR AXLE HUB RUNOUT

Rear Axle Hub