Lighting System (for Hatchback)
LIGHTING (EXT): LIGHTING SYSTEM (for Hatchback): TERMINALS OF ECU
1. CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU
Text in Illustration
Text in Illustration
(a) Remove the main body ECU.
(b) Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction in the wire harness.
(c) Reinstall the main body ECU.
(d) Measure the voltage and resistance according to the value(s) in the table below.
* *1: w/ Daytime Running Light System or w/ Theft Deterrent System
* *2: w/ Fog Light
* *3: w/ Daytime Running Light System
HINT
If the result is not as specified, the main body ECU or instrument panel junction block assembly may have a malfunction.
2. CHECK COMBINATION METER ASSEMBLY
(a) Disconnect the D101 combination meter assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
HINT
If the result is not as specified, there may be a malfunction on the wire harness.
(c) Reconnect the combination meter assembly connector.
(d) Measure the voltage according to the value(s) in the table below.
HINT
If the result is not as specified, the combination meter assembly may have a malfunction.