Front Bumper: Service and Repair

Front Bumper, Removing and Installing





1 - Hex-head screw (four)
• 0 Nm (7 ft lb)

2 - Carrier

3 - Plastic foam

4 - Plastic insulator

5 - Guide
• Remove or install cover -8- by pulling out of or pushing into both guides (left and right) in parallel.

6 - Front side marker light -M11-

7 - Spreader rivet
• Connects cover to wheel housing liner.

8 - Cover
• Material: PPIEPDM

9 - Hex-head screw
• Qty: 8
• 23-25 Nm (17-18 ft lb)

10 - Hex-head screw
• Oty: 4
• 30 Nm (22 ft lb)

11 - Hex-head screw
• Qty: 2
• 5 Nm (44 in lb)

12 - Hex-head screw
• Qty: 2
• 10 Nm (7 ft lb)

13 - Cover element
• For painted covers only.

14 - Hex-head screw
• Qty: 5
• 4.5 Nm (40 in. lb)

15 - Spoiler
• Fits into cover.