Center Mounted Brake Lamp: Service and Repair

High-mount Brake Lamp Bulb (M25)

Special tools, testers and auxiliary items required

• Wedge (T10039/1)

• Torque Screwdriver (V.A.G 1624)

High-mount Brake Lamp Bulb is located at upper edge of rear window beneath molded headliner end strip.

• The high-mounted brake lamp contains LEDs.

• The high-mounted brake lamp cannot be disassembled.

• If damaged, the entire high-mounted brake lamp must be replaced.

Removing:





- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Unclip headliner end strip - 4 - downward.

- Carefully push high-mounted brake lamp - 3 - out of its retainer - 1 - in direction or arrow.

- Disengage and disconnect harness connector - 2 -.

- Remove high-mounted brake lamp from vehicle.

Installing:

Install in reverse order.