Aero Wiper Blades

Aero Wiper Blades

To remove wiper blades, wiper arms must be driven into service/winter position. The service/winter position is activated by operating windshield wiper lever in one-touch wiping position within 10 seconds after switching off ignition.





Refer to Owner's manual.

Removing:

• Right and left wiper blades may not be interchanged during installation.

• Aero-wipers are very flexible. Grasp wiper blades only in area of wiper blade mount to lift them off the windshield.

- Drive wiper arms into the service-/winter position.

- Fold up wiper arm.

- Push button - 1 - and pull wiper blade mount - 3 - out of wiper arm - 2 - until it stops.





- Swivel wiper blade as depicted in the illustration and pull off wiper blade mount - 3 - in direction of arrow from wiper arm - 2 -.

Installing:





- Slide wiper blade mount - 3 - up to stop into wiper arm - 2 -.

- Make sure that button - 1 - in wiper arm - 2 - engages securely.

- Carefully fold the wiper arm down onto the windshield.