Scuff Plate: Service and Repair

Sill Panel Trim

• Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the same manner.

Removing

- Remove B-pillar trim. Refer to => [ B-Pillar Trim ] B-Pillar Trim.

- Pry trim - 1 - and - 2 - out of sill panel strip using wedge (T10039/1).

- Remove the two bolts - 3 -.

- Remove the two bolts - 4 -.

- Pull sill panel strip out of mountings in sill panel and out of door seal beading.





Installation

- To install, perform the steps used for removal in reverse order.

• Before installing, inspect the securing clips for damage and replace if necessary.