Center Armrest Illumination (L157)

Center Armrest Illumination (L157)


When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Carefully pry out Center Armrest Illumination using a screwdriver.






- Release the connector and disconnect it.

Bulb, Replacing

- Disengage retaining tabs - 1 - and remove heat shield - 2 - from diffusion lens of Center Armrest Illumination.






- Carefully pry bulb from socket.






- Replace bulb (12V, 5 W).

Installation

Install in reverse order of removal.