Interior Monitoring and Vehicle Inclination Deactivation Switch (E267)/(E360), Through 11.06

Interior Monitoring and Vehicle Inclination Deactivation Switch (E267)/(E360), Through 11.06

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

• Release Lever (T10039)


When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

• To remove the Interior Monitoring Deactivation Switch and Deactivate Vehicle Inclination Sensor Button, anti-theft warning system must be deactivated.

• The Interior Monitoring Deactivation Switch and Deactivate Vehicle Inclination Sensor Button comprise one component.

• Interior Monitoring Deactivation Switch and Deactivate Vehicle Inclination Sensor Button are located in B-pillar trim on driver's side.

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Carefully pry out Interior Monitoring Deactivation Switch and Deactivate Vehicle Inclination Sensor Button using a screwdriver.






- Release and disconnect the connector - arrow -.






Installation

Install in reverse order of removal.