Clutch, LuK, Servicing

Clutch, LuK, Servicing





1 Dual-mass flywheel

• Make sure centering pins fit securely

• Contact surface for clutch lining must be free of grooves, oil and grease

2 Clutch plate

• Allocation.

• Removing and installing --> [ Clutch, LuK ] Clutch, LuK

• Only replace together with SAC pressure plate

• Installation position: --> [ Installation position of clutch disc ] Clutch, LuK

3 SAC pressure plate

• SAC = "Self Adjusting Clutch"

• Only replace together with clutch plate

• Allocation.

• Removing and installing --> [ Clutch, LuK ] Clutch, LuK

• Checking ends of the diaphragm spring --> [ Checking ends of the diaphragm spring ] Clutch, LuK

• Check spring connection and rivet connections --> [ Checking ends of the diaphragm spring ] Clutch, LuK

• Only check position of adjustment mechanism with new pressure plates --> [ Only check position of adjustment mechanism with new pressure plates ] Clutch, LuK

4 Bolt M6, 13 Nm

• Loosen and tighten in diagonal sequence and in stages