Muffler: Service and Repair

Center Muffler and Rear Muffler, Separating

• A separating point has been provided in the connecting pipe for removing, installing and individual replacement of the center or rear muffler.

• The separating point is marked by depressions around the circumference of the exhaust pipe.

Special tools, testers and auxiliary items required

• body repair saw (V.A.G 1523 A)





or

• Chain pipe cutter (VAS 6254)





CAUTION!
To prevent injuries from metal shavings, wear protective goggles and protective clothing.

- Cut exhaust pipe at separation point - arrow - e.g. using body repair saw (V.A.G 1523 A) at a right angle.





- Position clamping sleeve at side markings when installing.

- When installing the double clamp, ensure that the bolt end does not project over the lower edge of double clamp.





- Align exhaust system so that distance - a - is equal at right and left sides.