Headlamp Washer Spray Nozzle Holder

Headlamp Washer Spray Nozzle Holder

• Washer nozzle holder can also be removed and installed with bumper installed.

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Pull out spray nozzle until it reaches stop and unclip cover cap - 1 - from pins - arrows -.






- Lift securing clip - arrow - slightly using a small screwdriver.






- Pull out washer nozzle bracket.

Installation

Install in reverse order of removal. Note the following:

- Bleed headlamp washer system after completing assembly work. Refer to => [ Headlamp Washer System, Bleeding ] Headlamp Washer System, Bleeding.