Headlamp Washer Spray Nozzle Lift Cylinder

Headlamp Washer Spray Nozzle Lift Cylinder

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Remove front bumper cover.

- Pull out spray nozzle until it reaches stop and unclip cover cap - 1 - from pins - arrows -.






- Remove mounting bolts - 2 - of lift cylinder - 3 - and remove lift cylinder from pins - 1 - - arrows -.






- To loosen hose connection, press securing clip - 1 - - arrow - and disconnect hose connection.






- Remove lift cylinder.

Installation

Install in reverse order of removal. Note the following:

- Bleed headlamp washer system after completing assembly work. Refer to => [ Headlamp Washer System, Bleeding ] Headlamp Washer System, Bleeding.