Rear Window Wiper Arm

Rear Window Wiper Arm

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1331)

• Rear window must remain closed when removing and installing.

Removal

- Move the wiper into park position.

• Vehicles through 01/05 and from 02/05 have a different cover cap - 1 - over the wiper arm nut.

Vehicles through 01.05

- Unclip rear window wiper cover cap - 1 - downward - arrow -.






Vehicles from 02.05

- Press cover cap - 1 - up until it releases - arrow -.






Continuation for all vehicles

- Remove cover cap - 1 - straight back from rear window wiper arm.

- Loosen hex nut - arrows - but do not remove it completely.






- Fold wiper arm up - 2 - and loosen it from cone using sideways motions.

- Remove hex nut - 1 - completely and pull wiper arm - 2 - off wiper arm shaft.

Installation

- Install wiper arm in reverse order of removal and set the rear window wiper rest position. Refer to => [ Rear Window Wiper Blade Park Position, Adjusting ] Rear Window Wiper Blade Park Position, Adjusting.