PD. Regina #5

PD. Regina #5

REGINA #5 Signal ground missing



Conditions for fault message:
Fault message stored if voltage is above 1.2 Volt.

Causes of fault:
Breakage in wire between Regina #5 and chassis connection

Fault symptom:
None.

PD1

Disconnection of Volvo System Tester
- Disconnect the System Tester according to P1. P1. Connection of Volvo System Tester
^ Continue with Connection of measurement box PD2


PD2




Connection of measurement box
Connect the measurement box to Regina and check the chassis connections according to N1-N2. N. Measurement Box, Signal Description
Check #5 extra carefully.

If the value is OK:
Intermittent fault.
^ Check the connectors for loose connection according to CD. CD. Checking of Wiring

If the value differs:
^ Check the wire between #5 and the chassis connection for breakage according to CD. CD. Checking of Wiring