Checking Leads and Terminals [EB9]

Checking Leads And Terminals





- Check pedal sensor and control module connector for loose contact as per HA5 and contact resistance and oxidation as per HA6. Checking Leads and Connections [HA]

- Check lead between pedal sensor connector terminal 1 and control module #16 for intermittent open circuit as per HA2, for intermittent short to ground as per HA3 and for intermittent short to supply as per HA4. Checking Leads and Connections [HA]

- Check lead between pedal sensor connector terminal 2 and control module #41 for intermittent open circuit as per HA2. Open Circuit [HA2]

Now go to 'Checking pedal sensor is working' EB10. Checking Pedal Sensor Is Working [EB10]