Checking Supply [EL5]

Checking Supply

- Ignition off.





- Connect combination relay 15-pin connector.

Connect a voltmeter between combination relay 15-pin connector terminal 15 and ground.

Voltmeter should read approx. battery voltage.

If reading is OK:
- Checking supply to pump motor EL6. Checking Supply to Pump Motor [EL6]

If reading is incorrect:
- Check fuse 11/9 for open circuit.
- If fuse is OK, check lead between combination relay connector terminal 15 and fuse 11/9 for open circuit as per HA2. Open Circuit [HA2]