Dash Board Cover Removal

If you are adjusting the air-mix damper, only the cover needs to be removed.

Remove:
- Side defroster cover plates (A)(screw).
- 4 panel vents (B). Roll vents down and pull out, or lever out carefully sideways with screwdriver. Both the vents and the air duct on the right-hand side must be removed.
- Speaker covers, left and right.
- Speakers (2 torx screws).
- Speaker connections.





- Cover screws (see arrows).
- Lift off covers.
- Install in reverse order.

NOTE: Check that hook (A) on right hand side of cover plate fits into upper frame section.